Table of Contents
Advertisement
34 Configuration
3
4
5
6
7
8
9
Copyright © 2008, Nortel Networks
.
To initiate the system connection process, press ENTER on the
terminal.
At the login prompt, log in as user: admin.
At the password prompt, enter the administrator password. The
default administrator password is admin.
To ensure continuing system security, change the default password to the
password of your choice after you successfully configure the switch.
After password verification, when the device is booted for the first
time, the Setup menu is displayed. Use the new command to begin
cluster creation.
[Setup Menu]
join - Join an existing iSD cluster
new - Initialize host as a new installation
boot - Boot menu
info - Information menu
exit - Exit [global command, always available]
>> Setup# new
Setup will guide you through the initial configurati
on.
Specify the network connectivity port.
Enter port number for the management interface [1-3]:
The Nortel SNAS 4070 has two ports for the management interface.
This port is assigned to Interface 1.
Specify the host IP address.
Enter IP address for this machine (on management
interface):
The IP address must be unique and within the same address range
as the Management IP address. The host IP address is assigned
to Interface 1.
Enter network mask.
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
ATTENTION
ATTENTION
Advertisement
Table of Contents
