Table of Contents
Advertisement
Installation
This chapter contains installation instructions for the Nortel Secure Network
Access Switch (NSNA).
Navigation
•
•
•
Unpacking the device
Unpack the shipping container to ensure the device and all accessories are
included and undamaged.
Procedure steps
Step
1
2
3
Copyright © 2008, Nortel Networks
.
"Unpacking the device" (page 25)
"Installing an NSNA device into a rack" (page 26)
"Cabling the device" (page 30)
Action
Remove the equipment from the shipping container and place the
device on antistatic material.
Check all items for damage.
If the equipment is damaged, contact your Nortel sales representative.
Use the following device shipping accessories checklist to verify that
in the shipping container includes all contents.
Check
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
ATTENTION
Accessory
Switch
Power units
Network cables
Use to
Install in a 4 post server rack.
Connect the units to an
appropriate and properly
grounded power source.
Connect the device.
25
Advertisement
Table of Contents
