Nortel 4070 Installation Manual page 41

Part Number
EB1639183
EB1639184
Procedure steps
Step
1
2
3
The keycode is applied to the device through either the CLI or the BBI.
Perform one of the following procedures to apply the license keycode.
Through BBI
Procedure steps
Step
1
2
3
4
Copyright © 2008, Nortel Networks
.
Description
Secure Network Access License - Add 2000 concurrent
endpoints
Secure Network Access License - Add 5000 concurrent
endpoints
Action
Contact Nortel Customer Support and purchase part number.
In North America, Nortel Customer Support can be contacted at
1-800-4NORTEL (1-800-466-7835). For phone numbers outside of
North America, refer to http://www.nortel.com/callus.
Once this is purchased, Nortel Customer Support sends a certificate
that contains a unique product code and an e-mail address. Send
this unique product code and the device MAC address to the e-mail
address provided. The device MAC address can be obtained by
using the /info/local command in the CLI.
>> Main# /info/local
After the unique product code and device MAC address is verified, a
keycode is sent back to you. Use this keycode to enable additional
authenticated user sessions.
Action
Click Config.
Select Cluster > Host > License from the BBI menu.
Paste the keycode in the text box labeled New License.
Click Save.
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Applying the Nortel SNAS license 41
—End—