Nortel 4070 Installation Manual page 27

2
Copyright © 2008, Nortel Networks
.
Align the slide rail with the front mounting flange by aligning the
score mark on the slide rail (1) with the score mark on the rail
between the upper and lower U. Push outward on the slide rail latch
to close to the latch and secure the slide rail. Do the same for the
other front of the slide rail. Align the slide rail with the rear mounting
flange and close the latches for the rear of the slide rail to secure it.
Ensure the slide rails are securely seated on the mounting flanges.
When the slide rail are secure, the slide rail pins protrude from the
slide rails (2).
Nortel Secure Network Access
Installation — Quick Start Switch 4070
NN47230-303 01.01 Standard
2.0 28 July 2008
Installing an NSNA device into a rack 27