Advertisement
Cisco IP Phone Configuration Guides
Provisioning for MyPBX
Important:
MyPBX supports phone provisioning for Cisco IP 7940, IP7960, SPA 501G, 502G,
504G, 508G, 509G, 514G, 512G, 525G2. This guide has been tested on Cisco IP
7940 with firmware version pos3.08.12.00. Be aware that different firmware
versions may have different web interface formats and functionality. Here we
guide you how to do phone provision for Cisco 7940/7960.
1. Verify Firmware Installed on your Phone
Make sure your Cisco 7940/7960 is configured to use the SIP protocol. By
default these phones are configured to use the proprietary SCCP which only
works will Cisco Call Manager.
2. Plug phone into the network
Plug your Cisco 7960/7940 IP phone into your LAN. (The Phone must be on the
same LAN as that of MyPBX IP PBX).
3. Approve phone and Assign an Extension
To do provisioning with Cisco 7960/7940 IP phones, you need to set MyPBX
working as the only DHCP server any more.
7/12
Advertisement
