Operational Setup - HighSecLabs SM20N-3 User Manual

Operational Setup

Now that the product is connected and powered up it is possible to
setup some essential operational settings.
The first and most important setting of the KM is the display
positioning. It is essential that the KM product configuration will
match the actual physical positioning of displays.
There are two ways to configure the KM product with the actual
display setup:

Select one of the predefined setups

Create a configuration file and load it to the KM
Option 1: Selecting one of the predefined setups
To select a default configuration type, press on the console keyboard
one of the keyboard shortcuts as described in the following figures.
The configuration loaded will include the following parameters in
addition to displays' arrangement:
- All displays are 1920 x 1200 resolution, same size (26" diagonal)
- Mouse acceleration is set to 6
- Mouse speed is set to 5
- VDT is enabled
- "Prevent transition while dragging" feature is Enabled
Option 2: Creating a custom configuration file
In case the required configuration does not appear on the predefined
configurations list, it is possible to create a configuration file using
HSL's KM Web Configuration Tool and load it to the KM. for more
information about this option please refer to HSL's Web
Configuration Tool user manual.
23
Section 4 - Operation
2/4/8 PORT SECURE KM: SM20N-3_SM40N-3_SM40NU-3_SM80N-3_SM80NU-3
SM80NU-3 SM80NU-3 SM80NU-3