Setting Up Your Computer Ip Address; Static Or Dynamic Configuration (Windows 2000/Nt/Xp) - Nortel BSR222 Fundamentals

Chapter 3

Setting up your computer IP address

The BSR222 is already set up to assign your computer an IP address. Use this
section to set up your computer to receive an IP address or assign it a static IP
address in the 192.168.1.34 to 192.168.1.254 range with a subnet mask of
255.255.255.0. This is necessary to ensure that your computer can communicate
with your Business Secure Router.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP must
already be installed on computers using Windows NT/2000/XP or Macintosh OS
7 and later operating systems. Instructions are provided here for configuring
Windows 2000, NT and XP operating systems. Refer to Nortel Business Secure
Router 222 Configuration — Basics (NN47922-500) and Nortel Business Secure
Router 222 Configuration — Advanced (NN47922-501) for detailed IP address
configuration for Windows 95, 98, Me and Macintosh and Linux computer
operating systems.

3.1 Static or dynamic configuration (Windows 2000/NT/XP)

1
In Windows XP, click Start, Control Panel.
a
2
In Windows XP, click Network Connections.
a
3
Right-click Local Area Connection and then click Properties.
4 Select Internet Protocol (TCP/IP) (under the General tab in Windows XP)
and click Properties.
5
The Internet Protocol TCP/IP Properties screen appears (the General tab in
Windows XP).
a
b To configure a static IP address, click Use the following IP Address and
In Windows 2000/NT, click Start, Settings, Control Panel.
In Windows 2000/NT, click Network and Dial-up Connections.
To have your computer assigned a dynamic IP address, click Obtain an
IP address automatically.
fill in the IP address (choose one from 192.168.1.34 to 192.168.1.254),
Subnet mask (255.255.255.0), and Default gateway (192.168.1.1) fields.
Nortel Business Secure Router 222 — Fundamentals
Chapter 3 Setting up your computer IP address 17