Intended Use; Technical Data - Bosch AHS 45-16 Original Instructions Manual

OBJ_BUCH-1297-004.book Page 11 Wednesday, April 25, 2012 11:10 AM
Keep all nuts, bolts and screws tight to be sure that the ma-
chine is in safe working condition.
Ensure replacement parts fitted are Bosch approved.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
Wear protective gloves
Wear eye protection.
Movement direction

Technical Data

Hedgecutter
Article number
Rated power input
Cutting length
Tooth opening
No-load stroke rate
Weight according to EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
Noise/Vibration Information
Measured sound values determined according to
2000/14/EC.
Typically the A-weighted noise levels of the product are:
Sound pressure level 74 dB(A); sound power level 95 dB(A).
Uncertainty K =2 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a <2.5 m/s , K=1.5 m/s .
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
Bosch Power Tools
Symbol

Intended Use

The machine is intended for cutting and trimming hedges and
bushes in domestic use.
AHS 45-16 AHS 50-16
3 600 ... H47 A..
W 420
mm 450
mm 16
-1
min 3400
kg 2.6
/II
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
English | 11
Meaning
Switching On
Switching Off
Beware electric shock hazard.
Permitted action
Prohibited action
Accessories
AHS 55-16 AHS 60-16
H47 B.. H47 C.. H47 D..
450 450
500 550
16 16
3400 3400
2.7 2.7
/II /II
F 016 L70 775 | (25.4.12)
450
600
16
3400
2.8
/II