Draytek vigor2920 series User Manual page 334

Dual-wan security router

Hide thumbs Also See for vigor2920 series:

Table of Contents

If you want to use PIN code, you have to know the PIN code specified in wireless client.

Then provide the PIN code of the wireless client you wish to connect to the vigor router.

For WPS is supported in WPA-PSK or WPA2-PSK mode, if you do not choose such mode in

Wireless LAN>>Security, you will see the following message box.

Please click OK and go back Wireless LAN>>Security to choose WPA-PSK or WPA2-PSK

mode and access WPS again.

Below shows Wireless LAN>>WPS web page.

Available settings are explained as follows:

Vigor2920 Series User's Guide

Check this box to enable WPS setting.

Need help?

Do you have a question about the vigor2920 series and is the answer not in the manual?