Draytek vigor2920 series User Manual page 135

Item
For other settings, refer to Details Page for PPPoE in WAN1.
B B r r i i d d g g e e
General page lets you set the first channel. As to set the third channel, please click the Bridge
tab to open Bridge configuration page.
Available settings are explained as follows:
Item
Enable
P1 to P4
Click Clear to remove all the configurations in this page if you do not satisfy it. When you
finish the configuration, please click OK to save and exit this page.
Description
configured with PVC in the page of Application>>IGMP.
Description
Check this box to enable that channel. Only channel 3 to 8 can
be set in this page, for channel 1 to 2 are reserved for NAT
using.
It means the LAN port 1 to 4. Check the box to designate the
LAN port for channel 3 to 8.
125
Vigor2920 Series User's Guide