Configuring Basic Settings; Accessing Web User Interface - Draytek vigor2920 series User Manual

C
C
S e t t i n g
S e t t i n g
For using the router properly, it is necessary for you to change the password of web
configuration for security and adjust primary basic settings.
This chapter explains how to setup a password for accessing into the web user interface of
Vigor router and how to adjust settings for accessing Internet successfully.
2 . 1 A c c e s s i n g
2 . 1 A c c e s s i n g
1. Make sure your PC connects to the router correctly.
2. Open a web browser on your PC and type http://192.168.1.1. The following window
will be open to ask for username and password.
3. Please type "admin/admin" on Username/Password and click Login.
4. The web page can be logged out according to the chosen condition. The default setting is
Auto Logout, which means the web configuration system will logout after 5 minutes
without any operation. Change the setting for your necessity.
o n f i g u r
o n f i g u r
s
s
W e b U s e r I n t
W e b U s e r I n t
Notice: You may either simply set up your computer to get IP dynamically
from the router or set up the IP address of the computer to be the same subnet as
the default IP address of Vigor router 192.168.1.1. For the detailed
information, please refer to the later section - Trouble Shooting of the guide.
Notice: If you fail to access to the web configuration, please go to "Trouble
Shooting" for detecting and solving your problem.
i n g B a s
i n g B a s
e r f a c e
e r f a c e
17
i c
i c
Vigor2920 Series User's Guide