Before Using For The First Time; Setting The Language; Messages; Running The First Programme - Miele WKH 130 WPS Operating Instructions Manual


Before using the machine for the
first time, ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the filters are securely
tightened to prevent the risk of water
leaks during use.
Removing the protective foil
and stickers
 Please remove
– the protective foil from the door.
– any stickers from the front and the lid
(Exception: warning labels must not
be removed).

Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
This washing machine has undergone
a complete functional test at the
factory and there will be some residual
water in the drum from this process.
For safety reasons, spinning is not
possible until the machine has been
prepared for use for the first time. To
activate the spinning function, you must
run a wash programme without laundry
and without detergent.
Using detergent could result in an
excessive build-up of foam.
 Press the  button in.
The welcome screen will light up.

Before using for the first time

Setting the language

You will be asked to select the language
you want for the display. It is possible
to change the language at any time via
"Settings".
deutsch
 Touch the  or  sensor until the
language you want appears in the
display.
 Confirm your selection of the
language by touching the OK sensor.

Messages

Two messages about removing the
transit bars and preparing the washing
machine for use will appear in the
display.
 Ensure the feet of the washing
machine are aligned and the transit
bars have been removed, and
confirm the messages with the OK
sensor.

Running the first programme

The TwinDos unit needs to be
activated before running the first
programme.
 Please see "TwinDos".


17