EcoFeedback
You can call up information about the
energy and water consumption of your
washing machine with the EcoFeedback
sensor.
The following information will appear in
the display:
– An estimate of the consumption
before the programme begins.
– The energy and water consumption
used thus far in a current programme.
– The energy and water consumption
of the programme which has just
finished.
1. Estimate
After selecting a programme, touch
the EcoFeedback sensor.
The estimated energy consumption
levels will be displayed as a bar chart.
Energy
Touch the or sensor to change
to the estimated water consumption
levels.
Water
The more bars () visible, the higher the
energy or water consumption.
The estimate will vary depending on the
wash programme, temperature and any
Extra options selected.
The display will change automatically or
you can return to the standard display
by touching the OK sensor.
Washing environmentally and economically
2. Actual consumption
Useful tip: At the end of the
programme, before opening the door,
you can view the actual amount of
energy and water used by the
programme which has just been run.
Touch the EcoFeedback sensor.
Energy
Touch the or sensor to switch to
the water consumption display.
If the door is opened or the washing
machine has switched off
automatically at the end of the
programme, the data will revert to
the estimated consumption.
Total consumption setting
– This setting gives a total of the
energy consumption and water
consumption to date.
See "Settings".
0.9
kWh
25