Assembly - ICON Health & Fitness . JMTBW10.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the weight training system, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the weight training system in a cleared area and remove
the packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
1.
To make assembly easier, read the
information above before you begin.
Pull the indicated Knob (A) outward, extend the
Top Frame (1) as far as possible, and then
release the Knob. Make sure that the Knob is
engaged in the hole in the Bottom Frame (2).
Then, pull the indicated Knob (B) outward,
move the Adjustment Leg (5) outward as far as
possible, and release the Knob into one of the
adjustment holes in the Adjustment Leg. Make
sure that the Knob is engaged in an adjust-
ment hole in the Adjustment Leg.
1
1
5
.
5
B
A
2