Table of Contents
Advertisement
If the result displayed is similar to Figure 3-2, it means the connection between your PC and
the Router failed.
Please check the connection following these steps:
1.
Is the connection between your PC and the Router correct?
Note:
The 1/2/3/4 LEDs of LAN ports which you link to on the Router and LEDs on your PC's adapter
should be lit.
2.
Is the TCP/IP configuration for your PC correct?
Note:
If the Router's IP address is 192.168.0.1, your PC's IP address must be within the range of
192.168.0.2 ~ 192.168.0.254.
3.
Is the default LAN IP of the Router correct?
Note:
If the LAN IP of the modem connected with your router is 192.168.0.x, the default LAN IP of the
Router will automatically switch from 192.168.0.1 to 192.168.1.1 to avoid IP conflict. Therefore, in
order to verify the network connection between your PC and the Router, you can open a
command prompt, and type ping 192.168.1.1, and then press Enter.
3.2
Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the 300Mbps Multi-Function Wireless
N Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a web
browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. However, as the USB
TL-WR842N
300Mbps Multi-Function Wireless N Router User Guide
Figure 3-2 Failure result of Ping command
- 9 -
Hide quick links:
Advertisement
Table of Contents
