TP-Link TL-WR842N User Manual page 116

 MTU Size (in bytes) - The normal MTU (Maximum Transmission Unit) value is 1492 Bytes.
For some ISPs, you may need to modify the MTU. But this is rarely required, and should not be
done unless you are sure it is necessary for your ISP connection.
 Primary DNS - Enter the DNS IPv6 address in dotted-decimal notation provided by your ISP.
 Secondary DNS - Enter another DNS IPv6 address in dotted-decimal notation provided by
your ISP.
 Connection Mode - The way to connect the ISP.
Alway On - Connect automatically.
•
Connect Manual - Connect by the user manually.
•
Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
 Address Autoconfiguration Type - RADVD (Router Advertisement Daemon) and DHCPv6
(Dynamic Host Configuration Protocol for IPv6) Server.
 Site Prefix Configuration Type - The type of IPv6 address prefix.
Delegated - Get the IPv6 address prefix from the ISP automatically, and the device will
•
delegate it to the LAN.
Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your
•
ISP to get more information before you configure them.
 LAN IPv6 Address - Display the LAN IPv6 address created by the device.
Click the Save button to save your settings.
TL-WR842N 300Mbps Multi-Function Wireless N Router User Guide
- 107 -