Changing Your Password; Finding The Serial Number And Model Number; Resetting Your Hp Ipaq; Resetting Your Hp Ipaq - HP iPAQ HW 6955 Instruction Manual

399310-xx1.book Page 13 Friday, December 16, 2005 3:52 PM
Step 6: Set up your HP iPAQ
When you turn on your HP iPAQ for the first time, you are provided instructions to
help you set up your device. Use the stylus to enter information. The stylus is located
on the right, back side of the device as you look at the screen. (See the product
component illustrations for the location of the stylus.)

Changing Your Password

1. Tap Start > Settings > Lock > Password tab.
2. Enter your current password.
3. In the Password box, enter your new password.
4. On the Hint tab, enter a phrase that helps you remember your password,
but does not allow others to guess your password.
The hint is displayed after the incorrect password is entered four consecutive
times.
5. When prompted, tap OK.
For more details about passwords, refer to Additional Product Information located
on the Getting Started CD.

Finding the Serial Number and Model Number

Locate the Serial and Model numbers before contacting HP Customer Support,
particularly if you are calling for in-warranty support.
View the Serial Number and Model ID by tapping Start > HP Help And
Support > Serial and Model Number.
You can also find this information underneath the battery of your HP iPAQ. To
locate the Serial and Model Numbers:
1. Remove the battery cover.
2. Remove the battery from the unit.
3. Locate the label containing the Product ID and Serial Number underneath
the battery.

Resetting your HP iPAQ

You might need to perform a soft reset if your HP iPAQ stops responding. The two
types of resets are soft and clean.
13