Set "No Password" For Logon; Set "Simple 4 Digit Pin" For Logon - HP iPAQ h5400 Series Reference Manual

Set "No password" for Logon

In this mode, you are not required to enter a PIN, password, or
fingerprint to logon.
1. From the Start menu, tap Settings, then Password.
2. Select "No password" from the down arrow list.
3. Tap OK.
4. Tap Yes to save the changes.
WARNING: In the event that an incorrect or unsuccessful PIN,
Å
password, and/or fingerprint is repeatedly or incorrectly entered,
all data and applications stored in RAM are erased and the
iPAQ Pocket PC is returned to the as-shipped configuration. It is
recommended that you back up all data frequently when using the
security features.

Set "Simple 4 digit PIN" for Logon

In this mode, you are required to enter a 4-digit PIN to logon.
1. From the Start menu, tap Settings, then Password.
2. Select "Simple 4 digit PIN" from the down arrow list.
3. Select from the down arrow list the length of time the
iPAQ Pocket PC can remain unused before you must reenter
the PIN.
Reference Guide
Using the Fingerprint Reader
5–11