Removing The Lcd Module - Prestigio NOBILE 156 Technical & Service Manual

Prestigio Nobile 156

Removing the LCD Module

1. See "Removing the Battery" on page 55
2. See "Removing the Middle Cover" on page 59
3. See "Removing the Keyboard" on page 60
4. See "Removing the Antennas" on page 61 ( Remove the two screws and put the two antennas aside. Do
not need to release the two RF cables from the upper casea and the sponge.)
5. Disconnect the inverter cable from the main board by using a plastic flat screwdriver and lift the cable up.
6. Remove the two screws as shown, disconnect the LCD coaxial cable from the main board and lift the
cable up.
7. Remove the two screws as shown.
8. Remove the two screws.
64
TECHNICAL SERVICE MANUAL