Cembre B62 Operating And Maintenance Manual page 6

ENGLISH
2.3) Compression
– By keeping operating button (10) pressed, the motor continues to operate: the ram will
gradually move forward until the two dies touch.
– It is recommended to continue pumping until the maximum pressure valve is activated
and a "click" is heard.
– The motor will continue to operate after the maximum pressure relief valve has acti-
vated. No further crimping force is applied, the oil is bypassed and returned to the reservoir.
2.4) Head rotation
– For ease of operation, the tool head can rotate through 180°, allowing the operator to
work in the most comfortable position.
Warning: do not attempt to rotate the head when the hydraulic circuit is pressurised.
2.5) Release of dies
– By pressing the pressure release lever (201) located below operating button (10), the
ram will retract and open the dies
2.6) Die replacement (Ref. to Fig. 2)
With the tool in rest position, proceed as follows:
– Withdraw each die from the guide in the head starting with the upper die.
– Insert the replacement dies into the guides in the head, starting with the lower die.
2.7) Battery status
(Ref. to Fig. 4)
– After releasing the operating button, the residual battery
capacity is automatically displayed for 5 seconds on
the indicator (15).
The number of LEDs illuminated indicates the residual
capacity:
10 LEDs illuminated: Fully charged
5 LEDs illuminated: 50 % capacity
1 LED illuminated: Minimum charge
When replacing the battery, press the two points marked with the word "PUSH" at the
same time, remove the fl at battery from its housing and insert the new one.
3. WARNING
Before starting work on electrical equipment, please ensure that either there are no live
parts in the immediate working area or that precautions are taken for working near live
parts in accordance with EN50110-1.
D
O NOT USE THIS TOOL ON OR NEAR ENERGIZED CONDUCTORS WITHOUT PROPER
PERSONAL PROTECTIVE EQUIPMENT
RESULT IN SEVERE INJURY OR DEATH
15
%
FIG. 4
.
FAILURE TO OBSERVE THIS WARNING COULD
.
5 30