Hardware Introduction - D-Link DSA-3600 Quick Install Manual

1.3 Hardware Introduction

The DSA-3600 is implemented on an embedded platform with mini-desktop form factor. On the front panel of
the product, there are eight LEDs that are used to indicate the system power, system status, and the link
status of the six Fast Ethernet ports. The interface ports are installed on the rear panel. Six Fast Ethernet
(100Mbps) ports are provided by DSA-3600. Two are configured as WAN Ports, and the other four are
configured as LAN Ports. Located on the rear panel are a serial console port, a reset button, and the power
socket.
Front Panel
1. Power
2. Status
1. Power
ON indicates the power is on, and OFF indicates the power is off.
2. Status
While system power is on, status OFF indicates BIOS is running, BLINKING indicates the OS is
running, and ON indicates system is ready.
3. WAN1~WAN2 LEDs
OFF indicates no connection, ON indicates connection, and BLINKING indicates transmitting
data.
4. LAN1~LAN4 LEDs
OFF indicates no connection, ON indicates connection, and BLINKING indicates transmitting
data.
5. Link: Indicates status of WAN1~WAN2 and LAN1~LAN4 connection.
6. Act: Indicates status of WAN1~WAN2 and LAN1~LAN4 data transmission.
DSA-3600 Quick Install Guide
1 2 3
3. WAN1~WAN2 LEDs
4. LAN1~LAN4 LEDs
4 5 6
5. Sign: Link
6. Sign: Act
2