9
Printer specific options (finishing options 1 to 3)
You can specify printer-specific options. You can specify these options
when using the staple or hole punch functions of this machine.
1
From the "File" menu, select "Print".
2
Select "Finishing Options 1 to 3".
3
Specify settings for the following:
–
Offset: Specifies offset.
–
Output Tray: Selects the output tray.
–
Binding Position: Specifies the binding position.
–
Duplex: Performs duplex printing.
–
Combination: Specifies booklet printing.
–
Staple: Performs stapling.
–
Hole-Punch: Performs hole punching.
–
Center Staple and Fold: Folds the printouts in half and staples.
–
Front Cover Page: Attaches a front cover page.
–
Back Cover Page: Attaches a back cover page.
–
Paper Source: Selects the input tray for the front cover page and
back cover page.
–
OHP Interleaving: Inserts interleaves between overhead projector
transparencies.
–
OHP Interleaving Tray: Selects the input tray for the transparency
interleaves.
–
Stop: Stops printing temporarily after part of the document has
been printed so that the proof print can be checked.
–
Resolution: Specifies the resolution.
9-14
Setting up the PPD driver (Mac OS 9.2)
200/250/350