Led Indicators - NetComm ROUTER WITH VOICE 3G10WV User Manual

3G10WV – FRONT BEZEL GRAPHICS
The background colour of the bezel must be printed WHITE INK
1.

LED Indicators

All type and graphics print WHITE INK onto background colour of CMYK C100/M56/Y0/K16
The front panel LED indicators are shown in this illustration and followed by detailed explanations in the
Lights and product keyline are for positioning purposes only – do not output
table below.
LED Color Mode
POWER
Green On
Off
Phone Green On
Off
LAN 1~4
Green On
Off
Blink
Wi-Fi
Green On
Off
Blink
Internet Green Blink
Off
On
3G
Green On
Blink
Off
2G Green On
Blink
Off
Low
Green On
Off
Med Green On
Off
High
Green On
Off
NOTE: The six LEDs on the right side of the front panel display (Internet, G, 2G, Low, Med, High) will cycle on and off if PIN code protection is
activated. In this case, you should consult section 4.2.1 PIN Code Protection (page 21) for further instructions.
8 – 3G10WV HSPA Wi-Fi Router with Voice
3G10WV
HSPA Wi-Fi Router with Voice
Description
Power on
Power off
Phone line active
Phone line inactive or not connected
Powered device connected to the associated port (includes devices with wake-on-LAN
capability where a slight voltage is supplied to an Ethernet connection)
No activity, modem powered off, no cable or no powered device connected to the
associated port
LAN activity present (traffic in either direction)
The wireless module is ready.
The wireless module is not installed.
Data being transmitted or received over Wi-Fi.
Data is transmitted through Internet connection
No connection to the internet or router powered off
Internet connection established
Internet connection established.
Connecting with UMTS cellular station
No connection with UMTS cellular station, no activity or router powered off.
Internet connection established.
Connecting to an EDGE, GPRS or GSM cellular station
No connection with EDGE, GPRS or GSM cellular station, no activity or router powered off.
Low signal strength
No activity, router powered off or on other signal strength
Medium signal strength
No activity, router powered off or on other signal strength
High signal strength
No activity, router powered off or on other signal strength
Signal Strength