NetComm ROUTER WITH VOICE 3G10WV User Manual page 94

--macfilter
list parameters of macfilter command
--wds
list parameters of wds command
--station
list authenticated wireless stations and their status
NOTE 5:
You can use this command to view your wireless settings; no matter the settings are modified from web or
CLI, the command will show the latest information for you.
Example 5:
After example 4, if we forgot our ssid, we can view the ssid with the following command.
wlan info --config
--help: Display usage for WLAN interface.
Scenario 2 to configure AP with OPEN-disabled security:
wlan config --enable 1--ssid "WLAN_TLF" --hannel 8
wlan security open --wep disabled
Scenario  to configure AP with Shred-WEP security
wlan config --enable 1--ssid "WLAN_TLF" --hannel 8
wlan security shared --wep enabled --nkey1 12456789012 --keyidx 1
Scenario 4 to configure AP with 802.1X security
wlan config --enable 1--ssid "WLAN_TLF" --hannel 8
wlan security radius --rasip 172.16.2.199 --raskey "whatever" --wep enabled
Scenario 5 to configure AP with WPA-PSK security
wlan config --enable 1--ssid "WLAN_TLF" --hannel 8
wlan security psk --pskey "12456789" --wpaenc aes
Scenario 6 to configure AP with WPA2 security
wlan config --enable 1--ssid "WLAN_TLF" --hannel 8
wlan security wpa2 --rasip 172.16.2.199 --wlPreauth 1
94 – 3G10WV HSPA Wi-Fi Router with Voice