Table of Contents
Advertisement
Error messages
Touch Screen
Message
Printer Error
Printer Overrun
After Error
Recovery
Job will Continue
Printer Error
Insufficient
Memory
After Error
Recovery
Press the Stop
button
Printer Error
Paper Size Error
After Error
Recovery
Press the Stop
button
Printer Error
Can't Print
Duplex
After Error
Recovery
Press the Stop
button
Printer Error
Cover Open
After Error
Recovery
Job will Continue
Printer Error
ROM Module
Restart System
8-8
Troubleshooting
Printer LCD Panel
Message
Print Overrun
Mem Overflow
Paper Set XXX
YYY
Can't Print
Duplex
Front Cover
Open
Invalid ROM A
or
Invalid ROM B
Solution
The required time to process
the print data exceeds the
print engine speed
because the current page
is too complex. Press the
Continue button on the
printer to resume printing.
The printer has insufficient
memory to execute the
current task. Press the
Continue button on the
printer, then press the
y stop button to clear the
error message.
The paper loaded in the
specified paper source
(XXX) does not match the
required paper size (YYY).
Press the y stop button to
stop the operation.
The printer cannot print on
both sides of the paper.
Make sure you are using a
paper type and size
supported by the Duplex
Unit.
The front cover of the printer
is open. Close the cover to
clear the error.
The printer cannot read the
installed ROM module. Turn
off the printer and remove
the ROM module.
Advertisement
Table of Contents
