Table of Contents
Advertisement
Auto Feed
Auto Feed enables the printer to automatically switch to a
different paper cassette when paper runs out during printing.
When paper runs out in the selected paper source, the printer
searches for the same size paper in the other paper sources in the
following order:
Cassette 1 -> Cassette 2 -> Cassette 3 -> MP tray
If the same size paper is not loaded in any paper source, a paper
size error message appears on the touch screen.
The default value for the Auto Feed setting is OFF.
Set Defaults Copy Job
This option allows you to store the current copy station settings
as defaults to be used when any Reset button is pressed or when
no button is pressed for more than 30 seconds on any screen.
Follow the steps below to store default values.
1. Make all the copy station settings you want to store as
defaults, then access the Select Administrator Items screen
and press Set Defaults Copy Job.
Key Tone
Standby
Control
Auto Feed
Select Administrator Items
Set Default Copy Job
ON
OFF
Color Calibration
ON
OFF
Copy Unit
Select Language
ON
OFF
Restore Defaults
Copy Unit
Restore Defaults
Using the Administrator Mode
Set Default Copy
Job button
Exit
6
6-5
Advertisement
Table of Contents
