Table of Contents
Advertisement
Touch Screen
Message
Printer Error
Aux I/F Error
Restart System
Printer Error
Paper Type Error
After Error
Recovery
Job will Continue
Printer Error
Photoconductor
Restart System
Printer Error
Waste Toner Box
After Error
Recovery
Job will Continue
8-10
Troubleshooting
Printer LCD Panel
Message
Invalid AUX I/F
Card
Check
Transparency
Install
Photocondctr
Install Waste T
Box
Solution
The installed interface card
cannot be used with this
printer.
(1) Press the y stop button
to stop the operation.
(2) Turn off the printer power
and remove the interface
card.
(a) A transparency is
loaded in the wrong
direction. Remove the
transparency jammed at
the paper feed area and
reload it in the correct
direction. Open and then
close the paper transport
unit to clear the error.
Printing will continue.
(b) A transparency that
cannot be used with this
printer is loaded. Use only
transparencies designated
for use with this printer.
No photoconductor unit is
installed, or the
photoconductor unit is not
installed correctly.
Turn off the power of the
printer, and then install the
photoconductor unit
correctly.
No waste toner box is
installed.
Install a waste toner box
and close the front cover of
the printer. The error will
clear and printing will
continue.
Advertisement
Table of Contents
