Table of Contents
Advertisement
4. Fan a stack of paper to prevent the sheets from sticking
together, and tap the edge of the stack on a firm surface to line
up the edges of the paper.
Note:
If your printouts are curled or do not stack properly when using
plain paper, try turning the stack over and reloading it.
5. Insert the stack into the cassette, lining it up with the right
side of the cassette. Make sure that all the paper is under the
metal retaining clip with the printable surface down.
Note:
Loading the cassette with too much paper may cause paper jams.
6. Slide the back paper guide until it just touches the edge of the
stack of paper.
Paper Handling
3
3-15
Advertisement
Table of Contents
