Applying Carriage Rod Grease - Epson SC-F9200 series User Manual

SC-F9200 Series User's Guide
D
Choose the nozzle arrays to be cleaned.
❏
Use the d/u buttons to choose the nozzle arrays
with faint or missing segments in the nozzle check
pattern and press the Z button.
❏
After selecting the arrays you wish to clean, select
Proceed and press the Z button.
E
Select a cleaning level and press the Z button.
Select Execute (Light) first.
F
Head cleaning will be performed.
The menu will close when cleaning is complete.
Print a nozzle pattern and inspect the results to
determine whether the problem has been
resolved.
"Checking for clogged nozzles" on page 82
U
If you paused the printer in Step 1, printing will
resume when head cleaning is complete; check
the printout to confirm whether the problem has
been resolved.

Applying Carriage Rod Grease

When the message Apply carriage rod grease. See
manual. is displayed on the screen of the control panel,
grease using the grease kit supplied with the printer.
Greasing areas
Carriage rod A
Use the grease tool and pad A to clean and grease rod
A.
Maintenance
Carriage rod B
Use the pad B to clean and grease rod B.
Greasing procedure
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on page 57
U
Carriage rod A
A
Press the # button.
The Maintenance menu will be displayed.
B
Use the d/u buttons to select Grease Carriage
Rod, and then press the Z button.
C
When the message Grease kit is needed.
Continue? is displayed, use the d/u buttons to
select Yes, and then press the Z button.
D
Open the front cover.
E
Attach a fresh pad A to the grease tool.
Insert the tab of the pad firmly into the
rectangular slot on the grease tool and fit the pad
to the tool as shown.
84