Epson SC-F9200 series User Manual page 71

SC-F9200 Series User's Guide
G
Shake the new ink pack as shown in the
illustration horizontally for approximately 5 cm
left and right for 5 seconds approximately 15
times.
H
Open the slider ink inlet cover.
I
Remove the ink inlet cap from the ink tank.
The method for removing the ink inlet cap differs
depending on the type of ink being refilled.
c
Important:
Remove the ink inlet cap slowly. If you remove
the cap too quickly, ink may splatter.
Maintenance
Except for High Density Black ink
For High Density Black ink
(1) Hold the part shown in the circled area in the
illustration to remove the ink inlet cap. If the
ink inlet cap is removed with another part, ink
adheres.
71