Foscam FI9804W User Manual page 18

3. You can see the port of your camera here. If you want to set Remote Access for several cameras on the
same network, you will need to change the HTTPS port for each camera.
4. If the UPnP of the router has been enable, you do not need to perform following steps.
need to select one of the following methods to configure port forwarding on your router. For these steps, we will
be using the TP-LINK brand wireless router as an example.
 If there is a UPnP function in your router：
Choose "Forwarding > UPnP", make sure that the Current UPnP Status is Enabled.
Shenzhen Foscam Intelligent
Shenzhen Foscam Intelligent
Tel: 86 755 2674 5668 Fax:
Tel: 86 755 2674 5668 Fax:
Select Yes and click Save.
Click Enable DDNS and click Save.
The content in the Manufacture's DDNS
column is the domain name of your camera.
Technology Co., Limited
Technology Co., Limited
86 755 2674 5168
86 755 2674 5168
Figure 2.7
Figure 2.8
Figure 2.9
www .foscam.co m
www .foscam.co m
Otherwise, you
16