Table of Contents
Advertisement
7.
The female VGA Out connector on the computer is connected to the female VGA In connector on the
monitor using the supplied VGA cable.
8.
The computer power cord is connected from the computer power cord receptacle to one of the GFCI
protected IEC outlets on the control panel using the supplied country specific adapter cable.
9.
The control panel power cord is connected from the control panel IEC power cord receptacle to a
suitable power source (100-240 Volts DC, 50, 60 Hz) using the supplied country specific power cord.
10.
Optional -VGA use is preferred. The RCA composite female Analog Video In connection on the monitor
can be connected to the RCA composite female Analog Video Out connector on the control panel or
another video source using the supplied cable. Some models may have a permanently attached RCA
composite male cable, or may not have this connection at all. If this cable is not used, do not leave it
connected to only one side. This could result in poor video quality.
a.
The control panel Analog Video Out can be connected to an external composite analog video
display or recording device.
b.
The monitor Analog Video In cable can be connected to a composite analog video source.
61
Advertisement
Table of Contents
