Table of Contents
Advertisement
Lock toggle showing the locked and unlocked states
To confirm the input you have entered in the current field, you must press either the tab or enter key, or click
on another field. If you do not confirm the entry, it will not be accepted when you click on the Store Settings on
the ROV button or Lock toggle.
The settings will become active when they are confirmed, but only for the current session.
Restoring the Factory Default Systems Tuning Parameters
To restore the factory default values for the systems tuning parameters, click on the Restore to Factory Defaults
button.
Restore to Factory Defaults
You must click on the Store Settings button if you want the factory defaults to be stored on the ROV for
future sessions.
Store the Settings for Future Sessions
Store Settings on the ROV (or simply: Store Settings)
To store the systems tuning parameters on the ROV for future sessions, click on the Store Settings on the ROV
button.
When you are finished modifying the systems tuning parameters, click on the Lock toggle to lock the power
management panel and avoid inadvertently changing a setting.
Calibrate the Compass
Calibrate Compass
To calibrate the compass, click on the Calibrate Compass button.
The compass is calibrated at the factory and should not need to be recalibrated.
Reset the ROV
Reset ROV
To reset the ROV, click on the Reset ROV button.
Resetting the ROV is like rebooting a computer. This button allows the ROV be reset without having to power
down the system or unplug and replug the tether. In general, the ROV should not need to be reset, but this
feature may help with some diagnostics procedures.
Launch VideoRay Update
The remaining button in this section is used to update the firmware in the ROV.
145
Advertisement
Table of Contents
