System Setup - Caliber RCD 272BTI User Manual

RCD 272BTi

SYSTEM SETUP

In any mode, press and hold [ DISP ] button to
enter system setup. Press [
to select options, rotate the [vOLUmE] knob to
adjust.
CLOCK
Press the [vOLUmE] knob, time display blinks.
Press [ ] or [ ] to choose hour or minute
.Rotate the [vOLUmE] knob toset clock, long
press the [vOLUmE] knob to save the clock
setting.
RETUNE mode
Rotate the knob to choose RETUNE-S or
RETUNE-L.
R E T U N E - S o r R E T U N E - L i s t i m e l e n g t h
selection of TA SEEK retune interval.
RETUNE-S: Short, TA SEEK retune interval is
45 seconds.
RETUNE-L: Long, TA SEEK retune interval is
180 seconds.
Remark: RETUNE mode functions for TA during
TA SEEK mode only.
AF: ON/OFF (RADIO mode)
Rotate the [vOLUmE] knob to choose AF ON or
OFF.
REG: ON/OFF (RADIO mode)
Rotate the [vOLUmE] knob to choose REG ON
or OFF.
DX/LO (RADIO mode)
Rotate the [vOLUmE] knob to choose radio local
14
manual
or distant at radio mode.
] or [ ] button • LO: Only stations with strong signal can be
received.
• DX: Stations with strong and weak signals can
be received.
AUX SENS (AUX mode)
Rotate the [vOLUmE] knob to choose AUX Input
sensitivity LOW, MID or HIGH at AUX mode.
AUTO CON: ON/OFF (BT mode)
Automatically connects the mobile phone was
last connected.
Rotate the [vOLUmE] knob to choose AUTO
CON ON or OFF.
COLOR
Rotate the [vOLUmE] knob to choose backlight
color.
SCN: The backlight change circularly.
COLOR 01~12: Select a preset color.
USER1~3: Select your favorite color. Press
the knob to enter color setting mode, press
[ ] or [
RED, the rotate the [vOLUmE] knob to select a
color.
Press and hold [ vOLUmE ] knob to memory.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display ID3
TAG information cyclely, e.g: TRACK->FOLDER-
>FILE->ALBUM->TITLE->ARTIST->TRACK->...
] button to select GREEN, BLUE or
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
TAG information by press [ DISP ] button.
S-CTRL (IPOD mode) : ON/OFF
Rotate the [vOLUmE] knob to choose S-CTRL
(Simple Control) ON or OFF.
REAR / S-W
Rotate the [vOLUmE] knob to choose REAR
or S-WOOFER.
DIMMER: ON/OFF
Rotate the [vOLUmE] knob to choose
DIMMER ON or OFF.
• ON: LCD dimmer is active when small light
of vehicle is turned ON.
• OFF: LCD always maximum brightness
regardless of the vehicle small light.
BEEP: ON/OFF
Rotate the [vOLUmE] knob to choose button
beep sound ON or OFF.
12/24H
Rotate the [vOLUmE] knob to choose time
format: 12 or 24 hour.
SWC SET
Rotate the [vOLUmE] knob to choose
POWER, MUTE, SOURE, VOL UP, VOL DN,
SEEK UP, SEEK DN or BAND, saved in the
steering wheel buttons.