Technical Data - Marmitek pro 8 User Manual

Ir control infrared extender set
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
The IR Receiver does not work together with some A/V apparatus and models which use
a higher IR frequency like for instance Bang&Olufsen (B&O) .
Sometimes it may be that the IR Receiver is troubled by so-called interference (direct
sunlight, TL lighting, energy saving lamps etc). In that case you ought to re-direct the IR
Receiver a bit for a better result.
Can I use the IR Receiver near a flat screen TV ?
Yes, sometimes it may happen that the IR receiver suffers some disturbance from the TV
screen. Then move the IR receiver in such a way that it is not in the direct radiation of the TV.
It is easy to test. The infrared LED indicator on the IR receiver lights up or flashes when it
receives an infrared signal. Use the LED indicator to place the IR receiver in the place with the
least interference (LED indicator is not activated or only faintly lights up).
Do you have questions that were not answered in the above mentioned ?
Then look at www.marmitek.com.

5. TECHNICAL DATA

IR Module
Feed POWER:
Feed STATUS:
IR LEDs connections:
IR Receiver connection:
Dimensions:
IR receiver built-on
Frequency range:
IR reception range:
Length of cable:
IR receiver:
IR reception angle:
Dimensions receiver bloc:
IR receiver built-in (optional)
Frequency range:
IR reception range:
Length of cable:
IR receiver:
IR reception angle:
Dimensions receiver:
IR CONTROL PRO 8
230VAC/50Hz, 12VC 500mA (supplied).
12VDC 200mA. Plug, - 5.5 mm outside / + 2.1 mm
inside (not supplied).
4 x 3.5 mm jack plug (mono).
1 Connector for maximal 3 parallel connected receivers.
85x49x24xmm (fastening points inclusive).
30-100 KHz.
± 10 metres.
2 metres, extendable to max 300 metres (UTP or equivalent).
Reception indication LED.
90° (+45°/-45° from centre).
51x10x8mm.
30-100 KHz.
± 10 metres
2 metres, extendable to max 300 metres (UTP or equivalent).
Reception indication LED.
90°(+45°/-45° from centre)
Diameter 11.7 mm - Drilling size 12 mm - Length 50 mm
Built-in depth 55 mm - Maximal thickness of material 40 mm.
TM
G:
Black
V+:
Black
IR:
White
G:
Black
V+:
Black
IR:
White
7

Advertisement

Table of Contents
loading

Table of Contents