Light time-out
●
the backlight of the display is switched off.
Standby mode
Shortcuts
— Assign shortcuts to the selection
●
keys to be used in the standby mode and select
which applications are shown in the active
toolbar.
If the active standby is set off, you can assign
keypad shortcuts for the different presses of the
scroll key.
Standby theme
●
to view a horizontal toolbar and the content from
different applications on the screen or
icon bar
to view a vertical toolbar. The content
from different applications is hidden. To display
the content, select a shortcut and press the scroll
key left. Select
Status light
— The rim around the scroll key
●
illuminates slowly when the device is in sleep
mode and quickly when there are missed calls or
received messages. To disable the illumination,
select Off.
Operator logo
●
if you have received and saved an operator logo.
Select
Off
if you do not want the logo to be
shown.
Language
164
— Select a time-out after which
— Select
Horizontal icon bar
Basic
to switch off active toolbar.
— This setting is only available
Changing the settings for the phone language or
writing language affects every application in your
device until you change these settings again.
Phone language
●
display text in your device. This also affects the
format used for date and time and the separators
used, for example, in calculations.
selects the language according to the
information on your SIM card. After you change
the display text language, the device restarts.
Writing language
●
language. This affects the characters available
when writing text and the predictive text
Vertical
dictionary used.
Predictive text
●
or off for all editors in the device. The predictive
text dictionary is not available for all languages.
Enhancement settings
Press
, and select
General
> Enhancement.
Some enhancement connectors indicate which type
of enhancement is connected to the device.
"Display indicators", p. 28.
The available settings depend on the type of
enhancement. Select an enhancement and from the
following:
— Change the language of the
Automatic
— Change the writing
— Set predictive text input on
Tools
Settings
>
>
See