Network; Enhancement Settings - Nokia N93 Manual

Hide thumbs Also See for N93:
Table of Contents

Advertisement

Network

Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with
.
Network mode
(shown only if supported by the wireless
service provider)—Select which network to use. If you
select
Dual
mode, the device uses the GSM or UMTS
network automatically, according to the network
parameters and the roaming agreements between the
wireless service providers. Contact your service provider for
more details.
Operator
selection—Select
search for and select one of the available networks, or
Manual
to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home cellular network.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Automatic
to set the device to
Cell info
display—Select
On
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.

Enhancement settings

In the standby mode,
indicates a compatible headset
is connected, and
that the headset is unavailable, or
a Bluetooth connection to a headset is lost.
a compatible loopset is connected and
phone
is connected.
Select Headset, Loopset,
Text
handsfree, or
Car kit
and from the following:
Default
profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See 'Profiles—set tones', p. 100.
Automatic
answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to
Beep once
answer is disabled. Automatic answer is not available for
Text
phone.
Lights
(for car kit)—Set whether lights remain on or are
switched off after the time-out.
to set the device to indicate
indicates
that a
Text
phone,
Bluetooth
or Silent, automatic
113

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Rm-55

Table of Contents