Create Access Point Groups; Packet Data Access Points - Nokia NSERIES N96 User Manual

already available are shown and can be shared by a
new access point. If you skip this step, you are asked
to select a connection method and to define the
settings needed.
To edit the settings of an access point, open one of
the access point groups, select an access point and
Edit. Follow the instructions from your service
provider.
Connection name
●
connection.
Data bearer — Select the data connection type.
●
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with Must be defined
fields can be left empty, unless your service provider
has instructed otherwise.
To use a data connection, your service provider
must support this feature, and if necessary, activate
it for your SIM card.

Create access point groups

Press , and select
Connection > Destinations.
Some applications allow you to use access point
groups to connect to a network.
To avoid selecting which access point to use every
time the device attempts to connect to a network,
172
you can create a group that contains various access
— Enter a name for the
or with a red *. Other
Tools Settings
> >
points, and define the order in which the access
points are used to connect to a network.
For example, you can add wireless LAN (WLAN) and
packet data access points to an internet access point
group and use the group for browsing the web. If
you give the WLAN access point the higher priority,
the device connects to the internet through a WLAN
if available and through a packet data connection if
not.
To create a new access point group, select
Options Manage
> >
To add access points to an access point group, select
the group and Options
copy an existing access point from another group,
select the group, scroll to an existing access point,
and select Options Organise
>
dest..
To change the priority order of access points within
a group, scroll to an access point, and select
Options Organise
> >

Packet data access points

Press , and select Tools
Connection Destinations
>
point, and follow the instructions on the screen. Or,
open one of the access point groups, select an
access point marked with
Follow the instructions from your service provider.
New destination.
New access point. To
>
Copy to other
>
Change priority.
Settings
> >
New access
>
, and select Edit.