Network; Enhancement Settings - Nokia N90 Manual

Network

Your phone can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with .
Network mode
operator)—Select which network to use. If you select
mode, the phone uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator selection—Select
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the phone sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your phone.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
112
(shown only if supported by the
Automatic to set the phone
Cell info display—Select
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.

Enhancement settings

Indicators shown in the standby mode:
Dual
A headset is connected.
A loopset is connected.
The headset is unavailable, or a Bluetooth connection
to a headset is lost.
Select Headset, Loopset, or
following options are available:
Default profile—To set the profile that you want activated
each time you connect a certain enhancement to your
phone. See "Profiles—Set tones", p. 21.
Automatic answer—To set the phone to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to Beep once
disabled.
On to set the phone to indicate
Bluetooth handsfree, and the
or Silent, automatic answer is