Call Barring; Network Settings - Nokia NSERIES N96 User Manual

Call barring

Press , and select
Call barring.
Call barring (network service) allows you to restrict
the calls that you make or receive with the device.
For example, you can restrict all outgoing
international calls or incoming calls when you are
abroad. To change the settings, you need the
barring password from your service provider.
Call barring and call diverting cannot be active at
the same time.
When calls are barred, calls may be possible to
certain official emergency numbers.
Voice call barring
Select the desired barring option, and set it on
(Activate) or off (Deactivate), or check whether the
option is active (Check
all calls, including data calls.

Network settings

Press , and select
Network.
Your device can automatically switch between the
GSM and UMTS networks. The GSM network is
indicated with
network is indicated with
170
Tools Settings Phone
> >
status). Call barring affects
Tools Settings Phone
> >
in the standby mode. The UMTS
.
Network mode
●
If you select Dual
>
or UMTS network automatically, according to the
network parameters and the roaming
agreements between the wireless service
providers. Contact your network service provider
for details and roaming costs. This option is
shown only if supported by the wireless service
provider.
Operator selection
●
the device to search for and select one of the
available networks, or
select the network from a list. If the connection
to the manually selected network is lost, the
device sounds an error tone and asks you to
reselect a network. The selected network must
have a roaming agreement with your home
cellular network.
A roaming agreement is an agreement between
two or more service providers to enable the users
of one service provider to use the services of
other service providers.
Cell info display
●
>
to indicate when it is used in a cellular network
based on microcellular network (MCN)
technology and to activate cell info reception.
— Select which network to use.
mode, the device uses the GSM
— Select Automatic
Manual to manually
— Select On to set the device
to set