Gps Data; Route Guidance - Nokia NSERIES N96 User Manual

To create a new landmark, select
landmark. To make a positioning request for your
current location, select Current
the position information manually, select
manually.
To edit or add information to a saved landmark (for
example, a street address), scroll to a landmark, and
select Options > Edit. Scroll to the desired field,
and enter the information.
You can sort your landmarks into preset categories,
and create new categories. To edit and create new
landmark categories, scroll right in Landmarks, and
select Options Edit categories.
>
To add a landmark to a category, scroll to the
landmark in Landmarks, and select
to category. Scroll to each category to which you
want to add the landmark, and select it.
To send one or several landmarks to a compatible
device, select Options > Send, and the method.
Your received landmarks are placed in the
folder in Messaging.

GPS data

GPS data is designed to provide route guidance
information to a selected destination, position
information about your current location, and
traveling information, such as the approximate
Options New distance to the destination and approximate
>
duration of travel.
position. To enter
Press
Enter
data.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
To use GPS data, the GPS receiver of your device
must initially receive position information from at
least four satellites to calculate the coordinates of
your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when
more satellites are found.
Options Add
>

Route guidance

Press
data
Inbox
Start the route guidance outdoors. If started
indoors, the GPS receiver may not receive the
necessary information from the satellites.
Route guidance uses a rotating compass on the
device display. A red ball shows the direction to the
destination, and the approximate distance to it is
shown inside the compass ring.
Route guidance is designed to show the straightest
route and the shortest distance to the destination,
, and select Tools Connectivity
>
, and select Tools Connectivity
>
> Navigation.
GPS
>
GPS
>
95