Charge The Battery - Nokia NSERIES N96 User Manual

2. If the device asks for a PIN
code or lock code, enter it,
and press the left
selection key. The factory
setting for the lock code is
12345.
Your device may have
internal and external
antennas. As with any radio
transmitting device, avoid
touching the antenna area
unnecessarily while the
antenna is transmitting or receiving. Contact with
such an antenna affects the communication quality
and may cause the device to operate at a higher
power level than otherwise needed and may reduce
the battery life.
1 — Cellular antenna
2 — Antenna for Bluetooth technology, wireless
LAN, and DVB-H; GPS receiver
Note that the Bluetooth, WLAN, GPS, and DVB-H
antennas are located in the back cover of your
device. If you change the back cover, check that the
new cover includes these antennas, otherwise
these connections stop working.

Charge the battery

1. Connect a compatible charger
to a wall outlet.
2. Connect the power cord to the
device. If the battery is
completely discharged, it may
take a while before the
charging indicator starts scrolling.
3. When the battery is fully charged, the charging
indicator stops scrolling. Disconnect the charger
from the device, then from the wall outlet.
Tip: Disconnect the charger from the wall
outlet when the charger is not in use. A
charger that is connected to the outlet
consumes power even when it is not
connected to the device.
17