Settings; Access Codes - Nokia NSERIES N96 User Manual

N series
Hide thumbs Also See for NSERIES N96:
Table of Contents

Advertisement

device is restarted. Be sure to back up data before
accepting installation of an update.
To get more information and to download the Nokia
Software Updater application, visit
www.nokia.com/softwareupdate or your local
Nokia website.
If software updates over the air are supported by
your network, you may also be able to request
updates through the device.
Tip: To check the software version in your
device, enter *#0000# in the standby mode.

Settings

Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured
in the device, based upon your network service
provider information. You may have settings from
your service providers already installed in your
device, or you may receive or request the settings
from the network service providers as a special
message.
You can change the general settings in your device,
such as language, standby mode, display, and
keypad lock settings.
See "General
settings", p. 163.

Access codes

If you forget any of the access codes, contact your
service provider.
Personal identification number (PIN) code — This
code protects your SIM card against
unauthorised use. The PIN code (4 to 8 digits) is
usually supplied with the SIM card. After three
consecutive incorrect PIN code entries, the code
is blocked, and you need the PUK code to unblock
it.
UPIN code — This code may be supplied with the
USIM card. The USIM card is an enhanced version
of the SIM card and is supported by UMTS mobile
phones.
PIN2 code — This code (4 to 8 digits) is supplied
with some SIM cards, and is required to access
some functions in your device.
Lock code (also known as security code) — The
lock code helps you to protect your device
against unauthorised use. You can create and
change the code, and set the device to request
the code. Keep the new code secret and in a safe
place separate from your device. If you forget the
code and your device is locked, your device will
require service and additional charges may
apply. For more information, contact a Nokia Care
point or your device dealer.
Personal unblocking key (PUK) code and PUK2
code — These codes (8 digits) are required to
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

N96-1

Table of Contents