Idrac Direct Led Indicator Codes - Dell NX3230 Owner's Manual

Drive-status indicator pattern (RAID only)
Blinks green two times per second
Off
Blinks green, amber, and turns off
Blinks amber four times per second
Blinks green slowly
Steady green
Blinks green three seconds, amber three
seconds, and turns off six seconds

iDRAC Direct LED indicator codes

NOTE: The iDRAC Direct LED indicator does not glow for the USB mode.
Figure 3. iDRAC Direct LED indicator
1. iDRAC Direct status indicator
The table here lists iDRAC Direct activity when configuring iDRAC Direct by using the management port
(USB XML Import).
Convention iDRAC Direct
LED indicator
pattern
A Green
B Flashing green
12
Condition
Identifying drive or preparing for removal.
Drive ready for insertion or removal.
NOTE: The drive status indicator remains off until
all HDDs are initialized after the system is turned
on. Drives are not ready for insertion or removal
during this time.
Predicted drive failure
Drive failed
Drive rebuilding
Drive online
Rebuild aborted
Condition
Glows green for a minimum of two seconds at the beginning and
end of a file transfer.
Indicates file transfer or any operation tasks.