Husqvarna WR 125 2009 Owner's Manual page 126

Table of Contents

Advertisement

REGISTRAZIONE FRENO
IDRAULICO AMMORTIZZATORE
L'ammortizzatore è registrabile
separatamente per la corsa di
comprensione e quella di
estensione.
A) COMPRESSIONE - Taratura
standard:
1) bassa velocità di
ammortizzazione: -15 scatti
(registro 4)
2) alta velocità di
ammortizzazione: -15 scatti
(registro 6)
Qualora si dovesse ripristinare
la taratura standard, ruotare i
registri superiori (4) e (6) in
senso orario sino alla posizione
di tutto chiuso, quindi tornare
indietro degli scatti sopracitati.
Per ottenere una frenatura più
dolce, ruotare i registri in senso
antiorario; agire inversamente
per ottenere una frenatura più
dura.
B) ESTENSIONE - Taratura
standard: -18 scatti.
Qualora si dovesse ripristinare la
taratura standard, ruotare il registro
inferiore (5) in senso orario sino
alla posizione di tutto chiuso, quindi
tornare indietro degli scatti sopracitati.
Per ottenere una frenatura più dolce,
ruotare il registro in senso
antiorario; agire inversamente per
ottenere una frenatura più dura.
126
WRCR 125 2009.indd 126
WRCR 125 2009.indd 126
SHOCK ABSORBER DAMPING
ADJUSTMENT
Adjustment of the compression
stroke is independent from the
rebound stroke.
A) COMPRESSION - Standard
calibration:
1) Low damping speed: -15
clicks (register 4)
2) Hight damping speed:-15
clicks (register 6)
To reset the standard calibration,
turn upper registers (4) and (6)
clockwise until reaching fully closed
position. Return then back for the
mentioned clicks. In order to obtain
a smooth braking action, turn the
registers anticlockwise. Reverse the
operation in order to obtain a
harder braking action.
B) EXTENSION - Standard
calibration: -18 clicks.
To reset the standard calibration,
turn lower register (5) clockwise
until reaching fully closed position.
Return then back for the mentioned
clicks. In order to obtain a smooth
braking action, turn the register
anticlockwise.
Reverse the operation in order to
obtain a harder braking action.
REGLAGE AMORTISSEUR
HYDRAULIQUE
La course de compression peut
être réglée séparément de celle
d'extension.
A) REGLAGE FOURCHE -
Tarage standard:
1) Petite vitesse d'amortissement: -15
clicks
(registre 4)
2) Grande vitesse
-15 clicks
(registre 6)
Pour rétablir le tarage standard, tourner
les registres supérieurs (4) et (6) en
sens horaire jusqu'à ce que la position
de tout fermé est atteinte. Retourner
ensuite à l'arrière de déclics souscités
Pour avoir une action freinante plus
souple, tourner les registres en sens
antihoraire. Renverser les opérations
pour avoir une action freinante plus
raide.
B) EXTENSION - Tarage
standard: -18 clicks.
Pour rétablir le tarage standard,
tourner le registre inférieur (5) en sens
horaire jusqu'à ce que la
position de tout fermé est atteinte.
Retourner ensuite à l'arrière de déclics
souscités.
Pour avoir une action freinante
plus souple, tourner le registre en sens
antihoraire. Renverser les opérations
pour avoir une action freinante plus
rapide.
EINSTELLUNG HYDRAULIKBREMSE
STOSSDAEMPFER
Der Stossdaempfer ist separat fuer
die Kompressionsbewegung und die
Dehnungsbewegung einstellbar.
A) EINFEDERUNG -
Standardjustierung:
1) Niedrige Dampfungeschwindigkeit: -
15 Klicks (Eintellschraube 4)
2) Hohe Dampfungeschwindigkeit:
15 Klicks (Eintellschraube 6)
Falls es notwendig ist, die
Standardjustierung wiederherzustellen,
die obere Einstellschraubes (4) und (6)
im Uhrzeigersinn bis zur komplett
geschlossenen Stellung drehen;
danach um Klicken oben gennant.
Um eine weichere Bremsung zu
erlangen, die Einstellschraubes gegen
den Uhrzeigersinn drehen; um eine
haertere Bremsung zu haben, in
ungekehrter Richtung drehen.
B) AUSFEDERUNG -
Standardjustierung: -18 klicks
Falls es notwendig ist, die
Standardjustierung wiederherzustellen,
die untere Einstellschraube (5) im
Uhrzeigersinn bis zur komplett
geschlossenen Stellung drehen;
danach um Klicken oben gennant. Um
eine weichere Bremsung zu erlangen,
die Einstellschraube gegen den
Uhrzeigersinn drehen; um eine
haertere Bremsung zu haben, in
ungekehrter Richtung drehen.
21-07-2008 16:45:03
21-07-2008 16:45:03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr 125 2009

Table of Contents