Appendix #4 - Changing The Camera Network Settings; Menu - Edit Network Parameters - Digimerge DNP5220E Hardware Manual

Appendix #4 - Changing the Camera Network

Appendix #4 - Changing the Camera Network Settings

The network settings on the camera can be manually set using the DigiConsole application:

Menu - Edit Network Parameters

The Edit Network Parameters option allows the user to manually set the Network Device options
(if desired).
NOTE: The Network Settings will
automatically be assigned by the Network
router (when the device is connected to the
Network). This information can be
changed, however incorrect changes to
these settings will prevent access to the
device, and a Hardware Reset will be
required.
1. IP Address & Port -The IP address
and port assigned to the IP Device.
2. Subnet Mask - The Subnet Mask
assigned by the Network Router.
3. Gateway Address - The Gateway
Address is the address of the Router.
This information is automatically
assigned by the Network Router, and
is necessary for communication on
the Network.
4. Domain Name Server 1 - The IP
address of the Domain Server. This
information is necessary when using
the DDNS Service.
5. Domain Name Server 2 - A backup
IP address for the Domain Server.
This information is necessary when
using the DDNS Service
36
1
2
3
4
5
HARDWARE MANUAL |
SECTION 5
©
Copyright 2007 Digimerge Technologies Inc.