Software Installation - Digimerge DNP5220E Hardware Manual

SECTION 3
4. Power: Connect the supplied power adapter to the
power connector on the back of the Camera. If the
device will be powered using PoE (Power Over
Ethernet), the power will be provided to the Camera
via the Network cable. Please see Appendix #5 for
further details on this technology and use of PoE
Equipment. PoE accessories are not included.
Software Installation Overview
This IP device is provided with software applications to
make the most of the Device. This includes software for
installing, configuring and managing 1 or more
Digimerge IP Devices.
The following applications are included:
• DigiConsole (Included) - The Digiconsole
application loads from the CD included with your
package, and provides you with the following:
• Web links to various resources and documentation
• Discovery of all the Digimerge IP devices on the network
• Network configuration of IP Devices
• Installs DigiConsole and Surveillance application on your
local PC
• Warranty information and DDNS registration
• DigiViewer (Stored on the IP Device) - This
application resides on the IP Product, and is loaded
into the default browser when a connection to the
device is made.
• Apple Quicktime (Free Download) - This
application is used for displaying a live video stream
from the Device. Quicktime can be downloaded at
http://www.apple.com/quicktime
NOTE: Minimum Quicktime version installed should be 7.1.6. Microsoft Internet Explorer users
can use the Digimerge ActiveX Component (automatically installed when you view video) instead
of Quicktime to view the Video.
• Surveillance / Recording Software - Used for displaying and recording up to 32 channels.
Both MPEG-4 and MJPEG Formats are supported.
Revision 1.0
Installation Overview
4
17