Instructions For Lanconfig; Instructions For Webconfig - Lancom 800+ User Manual

Hide thumbs Also See for 800+:
Table of Contents

Advertisement

LANCOM 800+ – LANCOM DSL/I- 10+ – LANCOM DSL/I- 1611 Office
Additional TCP/IP settings:
Assignment of IP address and name server address enabled
'IP header compression' disabled
These settings will permit a PC to dial into a remote LAN via ISDN and access
its resources in the usual manner.
6.3

Instructions for LANconfig

Launch the 'Provide Dial-In access (RAS)' wizard. Follow the wizard's
instructions and enter the required information.
The wizard will return a message to indicate that it has all the information
it needs. Close the wizard with Finish.
Configure Dial-Up Networking access on the dial-in PC as described.
Next, test the connection (see box 'Ping – quick testing for TCP/IP connec-
tions' →page 53).
6.4

Instructions for WEBconfig

RAS access via VPN cannot be configured using the wizard under
WEBconfig yet. It can only be set up in the expert configuration. For
details, please refer to the reference manual.
From the main menu, launch the 'Connect two local networks' wizard.
Follow the wizard's instructions and enter the required information.
Chapter 6: Providing dial- in access
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scl/i- 10+Dsl/i- 1611 office

Table of Contents