Specifications - Sony XM-ZZR3301 Operating Instructions Manual

Specifications
6 - 70 Hz, 12 dB/oct
50 - 300 Hz, 12 dB/oct
0- 10 dB (40 Hz)
12 V DC car battery
(negative ground)
10.5 - 16 V
at rated output: 60 A (at 20)
Remote input: I rnA
Approx. 356.8 x 55 x 276.8 mm
(14 1 /
8
x 2
1/ 4 X
11
in)
(w/h/d) not incl. projecting parts and
controls
Approx. 2.9 kg (61b 7 oz) not incl.
accessories
Mounting screws (4)
High level input cord (1)
Protection cap (1)
Dimensions
Mass
Design and specifications are subject to change without notice.
Power supply voltage
Current drain
Subsonic filter
Low pass filter
Low boost
Power requirements
Supplied accessories
Inputs
Maximum outputs
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
330 watts minimum continuous average power into 4 ohms, 20 Hz to 200 Hz with no more than 1.0% total
harmonic distortion per Car Audio Ad Hoc Committee standards.
Other Specifications
Circuit system Class D Technology
Pulse power supply
RCA pin jacks
High level input connector
Speaker terminals
Through out pin jacks
Suitable speaker impedance
2 - 8 0
1,100 W (at 2 0)
600 W (at 4 0)
Rated outputs (supply voltage at 14.4 V)
600 W RMS (50 Hz 1.0 % THD + N,
at
2 0)
330 W RMS (20 Hz - 200 Hz, 1.0 %
THD + N, at 4 0)
SN Ratio 65 dBA (Reference 1 W into 4 0)
Frequency response 10 - 300 Hz
(~g
dB)
Harmonic distortion 0.1 % or less (at 50 Hz, 4 0)
Input level adjustment range
0.3 - 6.0 V (RCA pin jacks)
6.5 - 16.0 V (High level input)
Outputs
• Packaging cushions are made from paper.
• Halogenated flame retardants are not used in cabinets.
• Halogenated flame retardants are not used in printed wiring
boards.
CEA2006 Standard
Power Output: 330 Watts RMS at 4 Ohms < 1
%
THD+N
SN Ratio:
65
dBA (reference: 1 Watt into 4 Ohms)
Specifications
Poids
Accessoires fournis
Circuiterie Technologie de classe D
Alimentation par impulsions
Entrees Prises <' I broches RCA
Connecteur dentree haut niveau
Sorties Bornes de haut-parleurs
Prises <' I broches <' I sortie directe
Impedance appropriee pour les enceintes
2 - 8 0
Sorties maximales 1 100 W (<' I 2 0)
600W (<'14 n)
Sorties nominales (tension d'alimentation <' I 14,4
V)
600 W RMS (50 Hz, 1,0 % THD + N,
32 0)
330 W RMS (20 Hz - 200 Hz, 1,0
%
THD + N,<'I40)
Rapport SIB 65 dBA (reference 1 W dans 4 0)
Reponse en frequence 10 - 300 Hz
(~g
dB)
Distorsion harmonique 0,1 % ou inferieure (<' I 50 Hz, 40)
Plage de reglage du niveau d'entree
0,3 - 6,0 V (prises <' I broches RCA)
6,5 - 16,0 V (entree haut niveau)
Filtre subsonique 6 - 70 Hz, 12 dB/oct
Filtre passe-bas 50 - 300 Hz, 12 dB/oct
Amplification de basses frequences
0- 10 dB (40 Hz)
Alimentation Batterie de voiture, courant continu
12 V (masse negative)
Tension d'alimentation 10,5 - 16 V
Courant
A
la sortie nominale : 60 A (<'12 0)
Entree de telecommande : I rnA
Dimensions Environ 356,8 x 55 x 276,8 mm
(14 1
/ 8
x 2
1/ 4
x II po) (lIh/p) parties
saillantes et commandes non
comprises
Environ 2,9 kg (61b 7 oz) sans les
accessoires
Vis de montage (4)
Cordon d'entree haut niveau (I)
Cache de protection (1)
La conception et les specifications sont sujettes <' I modification
sans preavis.
• Du papier est utilise pour les cales d'emballage.
• Aucun retardateur de flamme halogene n'est utilise dans la composition des coques.
• Aucun retardateur de flamme halogene n'est utilise dans la composition des circuits imprimes.