Advertisement
Storing
Fig. 17
STORE YOUR VACUUM SAFELY
1
Store the dusting brush, upholstery brush, the
crevice tool or the power brush on the mounts on
the removable tool caddy. (fig. 17)
2
Wrap the flexible hose around the base of the
vacuum and hook the end of the flexible hose into
the hose dock. (fig. 18) To release the hose, press
the Hose Storage button.
3
Wrap the attached cord strap around the power
cord when storing.
4
Store your vacuum cleaner with the rest of the
accessories safely in a cool dry area where they
will not be a hazard, will not get damaged and will
not cause damage to anyone or anything.
NOTE: Empty dust cup after cleaning and prior
to storing. (See "Maintenance" section for
instructions.)
12
TOLL FREE: 1-800-798-7398
NP319series_40_IB_ENG_120210_3.indd 12
Fig. 18
Resetting the Motor Thermostat
Your Shark
Lift-Around™ Portable Vac is
®
equipped with a protective Motor Thermostat. If the
motor should overheat, the thermostat shuts off the
power.
To reset the Motor Thermostat:
Press the Power Button to turn the vacuum off.
Unplug the vacuum.
Check for clogged hose or filter; unclog hose and
replace filter. Refer to Checking for Blockages.
Wait 45 minutes for vacuum to cool; then plug in the
vacuum.
Press the Power Button to restart the vacuum.
Note: If vacuum still does not start, contact Customer
Service at: 1-800-798-7398.
Ordering Replacement Parts
To order additional parts and accessories, go to
www.sharkclean.com or call 1-800-798-7398.
PART
Pre-Motor Filters
HEPA Filter
Telescopic Tube
Upholstery Brush
Crevice Tool
Dusting Brush
Power Brush
PART NO.
XFF318
XHF318
1057FT
1061FT
1062FT
1063FT
1064FT
12-02-10 11:38 AM
Advertisement
